|
|
---|
|
---|
Mustang GT Muscle Car
Auto Salon Aussie Car Seport
To be able to lap Tsukuba in under the one-minute barrier, the line between all-out motor sport engineering and traditional street tuner modifications blurs. Every single piece of the motor's systems has to be scrutinised to check for inefficiencies, wasted power, less-than-perfect balance and possible weaknesses, because while they're all very minor on their own (perhaps contributing maybe one percent, if that), when you go right through a vehicle with a race engineer's eye you'll find quite a few of these issues and suddenly you've got a huge gain on your hands.
A couple of numbers concerning the highly worked F22C engine stand out on the info sheet the Japanese tuning legends provided us: 12.9:1 and 235. That is the sky high compression ratio and amazing amount of kilowatts this naturally aspirated 2.2-litre car puts out, which is about as far removed from your average street-driven AP1 as Jupiter is from Black town, and what an F22C it is!
The custom intake and quad throttles feed obscene amounts of air into the completely rebuilt in-line four-cylinder, which has benefited from judicious reworking of Honda's already excellent engineering to provide a fantastically response power plant that can withstand the brutal forces dished out from regular track work. The sump is now a J's Racing design that stops engine-destroying surging, while there are fluid coolers not just for the motor, but the gearbox and diff as well, all to ensure that they don't overheat and damage anything. Then there are the Megen heavy duty engine mounts, Sam co radiator hoses (that resist blowing off) and an Aussie MoTeC M400 ECU, which will keep a very strict electronic eye over proceedings.
Everything has been carefully tinkered with, as J's Racing went about changing and honing only what they needed to, though they saw fit to develop a new exhaust manifold and featherweight titanium exhaust system for the two-door flier. But, it's not just about power, with the efficient delivery of each of the 235kW the car puts down of utmost importance.
After having the shell spot-welded for strength and a thorough roll cage welded in, a set of J's Raising's own CRUX Colver's were fitted, shod with pillow ball upper mounts for a solid mating face, as the noise and harshness damping effects of the stock rubber pieces were not required on this track-only brute. J's also fitted a 20mm roll centre adjuster to let them get their geometry bang on perfect, along with a set of pillow-mount tie rods to eliminate the S2000's cursed bump-steer (where the toe angle changes as the suspension moves up and down, slowing the car in the corner and making it unstable).
Further limitations were eradicated with the removal of the OEM suspension arms, which were replaced by J's Raising's own SPL rear pillow-mount arms, along with the J's Racing sub-frame reinforcement kit in both the front and rear ends, which reduces twisting and takes the last ounce of slack in the OEM road set-up and drop-kicks it out of the park. Make no mistake: this S2k is stiffer than one of the Sydney Harbour Bridge's support girders.
Honda Accord Crosstour shows tiny problems in the IIHS rollover tests
The Insurance Institute for Highway Safety (IIHS) conducted rollover tests on several vehicles and the Honda Accord Crosstour was among those that didn’t do well.
Already, many observers expect this model to get an early refresh. The suggestions include a new face and a titanium-reinforced roof. In the latest tests, the IIHS didn’t exactly roll the vehicles. Rather, the IIHS pushed a metal plate against 1 corner of a roof at a constant speed. To get a good rating, a roof must withstand a force of 4 times the vehicle’s weight before reaching 5 inches of crush. To get an acceptable rating, the minimum strength-to-weight ratio that’s needed is 3.25. A poor rating is given to those that have lower than 2.5. Vehicles that did remarkably well are the Grand Cherokee, Highlander, Liberty, and Venza, which all withstood forces of almost 5 times their weights. The Crosstour can withstand 2.8 times its weight while the Endeavor and Pilot can endure only 3 times its weight.
Spray painting your Car
Spray painting refers to a painting technique in which a device is used to spray a coating of paint, ink, varnish, etc. through the air onto a particular surface. The most common types of spray painting techniques make use of compressed gas, generally air, to atomize and direct the paint particles. Spray guns are either automated or hand-held and are equipped with interchangeable heads that enable different spray patterns. Spray guns are mostly used for spraying cars. Various spray painting techniques are employed to paint the surface of a car and almost all of them use compressed air or air pressure to discharge and direct the spray.
In case, your car needs to be painted but you don't wish to spend the money on a professional paint job, you can easily paint it yourself! Here are a few tips that might be useful for you:
* Before beginning to paint, sand or grind out all rust spots. Always use a filler for areas that are heavily rusted.
* Use a masking tape to distinguish those areas that you don't want to paint. Sometimes, you will have to remove certain pieces of the car so as to paint evenly.
* A lot of time and money will be wasted on paint if you don't prime your car with a high-quality metal primer. The surfaces that are to be painted must be first covered with a primer.
* Paint using a high-quality enamel such as Rust-Oleum to protect your car and to enhance the durability of your paint job. To attain good results, you can also attach a spray can and air compressor or buy a snap-and-spray aerosol can holder from any store for a reasonable amount. These spray can holders help in producing an even flow and you don't have to hold the spray nozzle for a long period of time.
* Maintain a distance of 8 to 15 inches from the car while spray
painting it in order to prevent paint runs. Apply the paint in an area that does not have dirt or dust as these particles can get into the paint before it dries.
(ArticlesBase SC #2514486)
Modifikasi Motor Bergaya Jepang
"Most likely to change the water-fueled engine or electric motor to make," says Terada the Matsuyamachi, Suji, Osaka. According to him, now modified in Japan, especially for CC skutik was great to play in the body.
Honda Mugen Euro to build Type R prototype
Following media speculation, MUGEN EURO Co., Ltd has confirmed the development of a highly-tuned Honda Civic Type R 'MUGEN' concept prototype road car, using the same powertrain as the Civic MUGEN RR saloon launched in 2007 in Japan.
The car is being developed in Japan by MUGEN EURO – the Northampton-based subsidiary of Honda’s long standing tuning partner MUGEN – and will be brought to the UK for testing later in the year. At this stage, the car is being prepared purely as a prototype model.
To enhance the performance of the already-impressive Civic Type R, MUGEN EURO will tune Honda’s 2.0-litre i-VTEC engine to produce more power and torque, as well as developing the brakes, exhaust and suspension. Externally, the Civic will take on an even more aggressive appearance, with a new aerodynamic package including a larger rear boot spoiler.
“In standard trim, the Civic Type R is a thrilling machine to drive,” said Hiro Toyoda, Vice President of MUGEN EURO. “It is a fantastic base model from which we hope to develop one of the quickest point to point front-wheel-drive road cars in the country.”
Japan Extreme Modification – Car And Motor Cycle
About motorcycles and cars modification , Japan is a country with the result that quite a lot of modifications. According to Keiichi Terada the modification experts from Sigma Spyder Osaka, modification enthusiasts is decreased than ever before Caused by the emergence of new products that have been modified from the manufacturer. types modification in the most preferred by consumers is on the body and engine. to modify the motor mostly done in the body, while for more cars in the machine.
Honda Estilo (Civic Hatchback) - Auto car modification by Signal Auto Bandung Indonesia
• Veilside steering wheel
• Veilside Shift knob
• Veilside foot rest
• Hispanic style interior trimming tiger skin
Audio :
• Head unit Pioneer KEH-P7025
• Monitor TV Oris in dash 7”
• Speaker focal 6” 2 set
• Subwoofer Sony Xplod 12” 2 pcs
• Cap bank Intersys
Interested with Signal Auto, contact here : SIGNAL AUTO
Honda Bikes
Honda bikes are one of the finest bikes you can find in the present motorbike market. The bikes from Honda are known for their style, performance and reliability. Being highly practical and robust, people love to get these two wheelers. No matter if you are starter or an expert rider Honda bikes can give you an experience of a lifetime.
Some of the most unsurpassed bikes from Honda include CBR1000, Honda 599, and CBR250. These are the most popular bikes from Honda which are sought after by endless people.
The style as well as the functionality of these bikes contributes for their success. Being highly versatile, different riders are able to find their dream bike in the form of these bikes from Honda.
Honda bikes made their entry into the market during 1949. Since that time, these bikes have been improving and new designs and feature are being introduced in their line. The beauty and efficiency of Honda bikes are the two of its USPs which have been seen ever since they entered in the arena of bikes. The innovations in these bikes together with up to the minute technologies have allowed Honda to come up with unsurpassed motor bikes. Owing to the high quality together with style, Honda motorcycles are the number one choice of bike lovers.
One of the greatest bikes from Honda includes Honda 599. Its great features including 4-cylinder engine, six-notch transmission, and computerized ignition controls make it a great bike for all. You can get this bike in about $7399. Honda CBR 250 is another wonderful bike from Honda. It has amazing features yet it is very easy to maintain. Another fantastic bike from Honda is Honda CBR1000. It is replete with great features including computer-operated valve, a Unit Pro-Link rear suspension, a Dual Stage Fuel Injection System amongst a range of other desirable features. It has 998cc engine which make sit extremely fast. It is also very light weight which makes it a great bike for all.
Honda ST1100 is a wonderful bike which is an excellent two wheelers for those who wish to use their bikes for long distances. It has great features such as anti-lock brake system, 40 amp air-cooled alternator, 7.4-U.S. gallon capacity fuel tank besides scores of other fantastic features. Honda RVF400 is another wonderful two-wheeler with features such as advanced handling, upside-down front forks and rich design.
With these models and many more, Honda motor bikes are a treat for the riders. You will love the ride, adore the design and thank Honda for other wonderful features.
Related posts
- Tips on Motorcycle Modification
- Motorcycle Headlights – Change in Trend and Style
- Yamaha R1 Expert Bike
- Valentino Rossi crash update
- Electric Motorcycles
CBR1000, CBR250, CBR300cc, CBR600cc, Honda 599, Honda Bikes, Honda CBR1000rr, Honda Modification., Honda ST1100, Hondastyle, Modification Motorcycle, motorbike, trend motorcycle
Toyota’s ENDO Urban Car Concept
August 31, 2005 Toyota is the world’s second largest automotive manufacturer and it has known for some time that it would not become number one selling automobiles as we now know them. Over the last few years the Japanese giant has both entrenched itself in traditional automotive enclaves such as prestige motoring and Formula 1, while it has evolved numerous concepts for mobility solutions in the grey area where robotics meets personal transport – ranging from walking chairs, through intelligent transforming personal wheeled transporters. Two of the concepts to be shown by Toyota at the upcoming Frankfurt Auto Show are in this “personal mobility” area - the Endo and the I-unit. Emanating from the company’s ED2 design studio in Southern France, the Endo is an urban-friendly car designed to address some of the key issues of modern urban life, while the i-unit has been seen previously at the New York Auto Show in January this year and is one of the major attractions at EXPO 2005 in Aichi, Japan and is "a new approach to human mobility that enables the driver to interact with his or her surroundings. The design of the i-unit is "inspired by a leaf, a natural expression of life on earth." Read More
Car Alien
Benda apakah yang ada pada gambar di bawah ini? Properti film fiksi ilmiahkah? Bukan, ini hanyalah sebuah mobil biasa. Tapi lebih terlihat seperti mobil masa depan atau mobil alien (kalaupun ada).
Mobil ini dibuat oleh Mike Vetter dari Florida. Pemilik sebuah perusahaan modifikasi mobil bernama The Car Factory ini, mempreteli mobil Chevy Aveo, mengganti eksteriornya, dan memasang pintu Gull-wing sebagai pelengkap. Mobil ini juga dijual oleh Vetter di situs ebay. Tertarik?
Seandainya mobil ini dapat terbang sungguhan, mungkin akan jauh lebih menarik. Tetapi desain yang ditawarkan juga cukup menggoda. Saya yakin bangsa Indonesia juga mampu membuat inovasi seperti ini, bahkan yang jauh lebih baik dari ini.
Motor Vespa Modifikasi Chooper
Modifikasi vespa Mini
What’s in the mind when you hear the word ‘Japan’? State of progress and sophistication with the technology side by side but remain consistent with the cultural uniqueness. Or one of the country that is now seen as the starting center of the world fashion trend. Or may also be one of the largest automotive manufacturers in dunia.Well, all the above is generally a fairly accurate description of Japan, especially for the last mentioned. As one of the largest manufacturers of automotive, Japan succeeded in exporting its products to various countries dibelahan world. Even the successful market in some countries. Various types of vehicles, both four wheels and two wheels of different types of succession enliven the world automotive market. In addition to the car or the motor itself, there is one thing that is also quite interesting to be, the modification of the style of the country’s sunrise. Style of ornamentation that is now also began to participate in the infecting various parts of the world,
Low Rider dan Chopper MIO Modifikasi
“As shown on the front and rear wheels, a long follow-up,” said Junaidi, builder Admair Thula (AT) which is based in Medan. Total length of the motor to be 3.5 meters. That is, dimensions Mio delay of about 1 meter.
Long retreat, retreat, said Junaidi, to 32 cm. This does not include the end of the outer tire. However, there are unique on the retreat, withdraw it. When the construction is typically shaped letters “H”, here he made a model “J”.
“To be strong due to rim and engine load, the material is taken from galvanized,” he explained. This effort shall thumbs up. Imagine, with the rear wheel of a super-wide, the device remains in the middle. If viewed from the tire and rim application, then surely this Mio into Bobber style.
To adjust the back of the already overly stretch, re-house CVT reformed. Way, that part was cut and added to plates 8 cm to match the back, though not quite fit the position because it was too out of place.
Front wheel chopper-like models in the Harley-proved difficult to maneuver. Turning radius is very small like a chopper-style motorcycle HD. Changes made by sliding out and replace komstir triangular shaped enggak again straight, but it resembles a “V”.
When asked to roads with berziga-zagging in between rows of cones, the motor was trouble. In fact, the driver must be off the foot many times. However, testing his courage Junaidi to take the road more than 5 km.
Sharmistha Mukherjee in New Delhi
An industry source informed, "A lot of cross-pollination is going to happen between the automobile industries in India and China. Shanghai Automotive Industry Corporation has already made an entry into the market here and manufacturers such as Chery, Brilliance, JAC, BYD and Beiqi Foton are working out modalities to start operations. These companies have products which are a strategic fit for the Indian market. Some of them have already made enquiries regarding the vendor base available in India for starting operations here."
Low Rider dan Chopper MIO Modifikasi
“As shown on the front and rear wheels, a long follow-up,” said Junaidi, builder Admair Thula (AT) which is based in Medan. Total length of the motor to be 3.5 meters. That is, dimensions Mio delay of about 1 meter.
Long retreat, retreat, said Junaidi, to 32 cm. This does not include the end of the outer tire. However, there are unique on the retreat, withdraw it. When the construction is typically shaped letters “H”, here he made a model “J”.
“To be strong due to rim and engine load, the material is taken from galvanized,” he explained. This effort shall thumbs up. Imagine, with the rear wheel of a super-wide, the device remains in the middle. If viewed from the tire and rim application, then surely this Mio into Bobber style.
To adjust the back of the already overly stretch, re-house CVT reformed. Way, that part was cut and added to plates 8 cm to match the back, though not quite fit the position because it was too out of place.
Front wheel chopper-like models in the Harley-proved difficult to maneuver. Turning radius is very small like a chopper-style motorcycle HD. Changes made by sliding out and replace komstir triangular shaped enggak again straight, but it resembles a “V”.
When asked to roads with berziga-zagging in between rows of cones, the motor was trouble. In fact, the driver must be off the foot many times. However, testing his courage Junaidi to take the road more than 5 km.
BMW Snug
Hungarian designer David Raffal has the clear idea about how new generation cars should look like. With his new concept, called “BMW snug”, this futuristic looking car is most likely going to be on the roads once in the future. The project was developed in tandem with the BMW group. What is special in its design is that David Raffal strives to achieve a sense of community.
According to its designer, the car is designed for different people with different views and ideas, those who value private relations. Being just a concept, BMW snug is reported to be highly assessed by BMW, but still nothing is clear about its future. BMW snug is a 4 seater vehicle which is able to be used as a sitting room. Its design appears to be sophisticated with paper waves for covering a central cell.Chrysler 300C, Chevrolet Corvette auctioned as automotive world digs deep for Haiti
The world’s automotive manufacturers continue to raise funds in their own unique way to assist the emergency efforts in Haiti after the January 12 earthquake.
More than 150,000 people have been buried in the capital Port-au-Prince alone and 600,000 are homeless. Official estimates suggest the death toll could rise above 200,000.
Chrysler is doing its bit, with new CEO, Olivier Francois, donating his “eco” trimmed 300C to the American Red Cross after inviting 300 celebrities to sign it at Sunday’s Golden Globe awards.
Manufactured specially with bamboo, cork and recycled materials, ink from Samuel L Jackson, Sandra Bullock, Morgan Freeman and Sigourney Weaver is expected to see the 300C raise US$1 million in an upcoming auction.
The donation is on top of US$100,000 the Chrysler Foundation has already given to Oxfam America and the US Fund for UNICEF to support relief and recovery efforts.
Chrysler dealers, employees and retirees are also digging deep, while dealerships in Puerto Rico are collecting household and non-perishable items.
General Motors made a similar contribution, auctioning a one-of-a-kind crystal red 2008 Chevrolet Corvette on Saturday for US$200,000.
The limited edition was the last of 427 cars built specifically for North America and was worth only US$80,000 when new.
It took GM’s total contribution to US$300,000 so far, after earlier in the week donating US$100,000 to the Red Cross.
The world’s largest automotive manufacturer has become the automotive world’s largest supporter, last Friday donating US$500,000 to the Red Cross, Save the Children and Doctors Without Borders, the latter two having a long-running commitment to programs in Haiti.
Two independent distributors have also found US$100,000 each for the cause, while Toyota North America plans to match without limit the contributions of employees until the end of the month.
Ford is also matching employee donations (up to US$50,000 per worker) to the Red Cross and working closely with its dealership in Port-au-Price, Behrmann Motors, to do critical work on the ground.
American Honda has pledged more than US$300,000 to the Red Cross and is supplying water pumps, portable generators and other Honda products.
Hyundai and Nissan will both contribute at least US$100,000 to the earthquake relief effort as will supplier Eaton, while Bridgestone’s contribution has already exceeded US$150,000.